Tag Archives: Granada

A very large update… so large, Windows would be proud of it!

I have to admit, I had to check my last post to remember the last time I posted here. “Update blog” is always there in my to-do list but it has been continuously postponed due to more urgent tasks needing to be addressed.

Finally today I got some time to kill while I’m performing a clean install of F22 on my laptop so I figured I might as well get on with it!

So… my last post seems to be related to a little bike ride I did to East Blean Woods as I was recovering from a silly knee injury. Well, the knee is all better now (I’ve even managed to drop my parkrun PB to 20:04 afterwards, that’s all the proof I need!), and the bike featured on the previous post is currently lying in the shed with no chain and an un-matched wheel.

Effectively the week after I wrote that post I came across a listing on Freecycle of “two boys racing bikes” – I had a quick look and something didn’t add up as the proportions seemed to suggest they were of an adult frame. So I wrote to the poster and asked about the frame size, to what she replied “well they were 17-18 year olds, they are not small bikes!”. I set the wheels in motion then, stormed back home, fitted the bike rack in the car and drove away to get them 🙂 And although they needed some refurbishment I ended up with a pair of nice old road bikes – a 1986 Raleigh Granada and a mid-80s Puch Medallion (we were unable to trace the model to the year yet). The Puch needs a lot more done to it, but the Granada is now my everyday bike, after giving it the “cheapo” treatment – I only had to shell out a bit more (~ £50 more) because I wanted 700c wheels to use my Schwalbe Marathons in them, and the Granada came with the older 27” size. So I basically got a road bike for next to nothing! (it does have some surface rust but nothing too major – plus it acts as a theft deterrent 🙂 )

IMG_20150621_191802640_HDR

The Granada with the Reculver towers as a backdrop. The return journey was a bit costly with some headwind! 🙂

It is a bit big, though (25” from the bottom bracket to the seatpost! Those “boys” were not small, definitely way over 6ft tall !), so we’ve changed the stem to make the bike more compatible with someone of my stature. Although it isn’t too bad – I have some clearance from the top tube when I have to stop, that’s all I need!

Right, and a week after this happened I headed off to Porto with my two housemates, in what was supposed to be a 2-day conference followed by a nano-holiday (3 days, plus the weekend). The conference was all right, although the chairs in the lecture theatre could have been a bit more comfortable (!) , and I had the chance to network with a lot of Physics PhD students in Portugal doing a whole range of experimental research (the symposium was limited to Engineering Physics submissions). Another presentation under my belt, which is always good – you only realise how well you are within a given subject when you have to explain it to other people, especially those who are non-specialists.

Canoeing on the Douro! It has been 3 years since I last took the canoe out on the river - I was missing that!

Canoeing on the Douro! It has been 3 years since I last took the canoe out on the river – I was missing that!

After the conference I took out my scientist hat and put on my tour guide one. It was a short holiday, but one that I can actually call a holiday in the sense of the word – we did things, we went out and visited stuff. Ranging from canoeing down the Douro to a nice cycle ride round the Gaia seafront, topped up with a nice meal at a seaside restaurant, it was really nice. (well, the bikes could have been better! I really need to keep a good bike in Portugal, but for that to happen I need to get rid of the bad ones first… )

We then came back and I went straight back to work (the following day, at least – we got home quite late as we had an evening flight, plus a 2h drive down to Canterbury from Stansted). A lot of things awaited me – a couple of papers we sent for peer-reviewing, including one which has been basically stuck for the best part of an year (through different journals, not-so-competent reviewers and a franken-manuscript which could have definitely been written a bit better…), plus the usual experimental work and the thesis writing (I intend to have a bit more written till September, but first I need to find a way of marrying all the different projects and experiments I’ve been involved with and getting a coherent output – which can be difficult when you work with incoherent light all the time! (ha ha)

IMGP1908

Cycling in the Peak District with James!

Little breaks are always welcome, though. I do my share of recreational (ie, non-competitive) sports, namely my runs, cycles and sculls, but sometimes it is quite good to just disconnect in full for a whole weekend (at least for now, while my thesis submission date is still a bit far away). I had the “excuse” of helping out a mate of mine who had a job interview up in Nottinghamshire and thought a weekend trip to the Peak District wouldn’t hurt, especially now that I had a nice road bike to explore it with! So we had a nice weekend where we did about 60 miles between two days (distance-wise it wasn’t a big deal, there were a few big hills along the way but it was mostly to appreciate and absorb the surroundings!). If it hadn’t been for the breakdown we had on the way back it would have been perfect – we ended up on the side of the A1 in the middle of Cambridgeshire with a broken clutch cable. 😛

IMGP1933

Beautiful scenery and nice, quiet cycle routes. Perfect!

The annoying bit about it was that I knew I could fit a replacement one myself, it was a very simple thing, but I needed to have an auto parts shop open (on a Sunday, good luck!) which had the cable in stock. So in the end we just had the car recovered back to Canterbury (thank goodness for the breakdown cover I kept paying for but never had to use, until that moment at least!) and a few days and £15 later I had the new cable perfectly connected and working. At least it was better than the blow in the exhaust which created another blow in my finances (a few days before the trip to the Peak District I found a big hole in the middle section of the exhaust, £100 for a full replacement… but I can’t say I wasn’t expecting it, in the past two years I’ve been considering replacing it but waiting until I had a fail on my MoT test, which surprisingly didn’t happen!)

Habemus clutch cable! So much grief for a £15 part...

Habemus clutch cable! So much grief for a £15 part…

Anyway, all good now, this weekend has been a bit quiet… I helped out in the parkrun doing the lead bike (I originally wanted to run, but I’ve managed to do something to my shins as a consequence of a 10k race I ran last weekend and after which I didn’t stretch properly…), which is now a doddle with the Granada, which is significantly lighter than my old Oakland 🙂 . After that I went to a bike jumble in Faversham where I got some nice cheap bike parts for the soon-to-be refurbishment operation of both the Puch and the Oakland (still don’t know what I will be doing with the latter, though…), and in the evening I decided to go for a nice bike ride, and along the way I thought about visiting a friend of mine living in Herne Bay, which turned out all right if it hadn’t been for the fact that I didn’t bring my bike lights (as I originally expected to return home in an hour’s time), hence the return journey was a bit scary – I did have my red one in the rear, but nothing in the front! Anyway, I’ve managed to clock almost 30k in a bit more than an hour – not bad, especially considering that I had to use some shared paths which slowed me down a bit.

Parkrunning... but on a bike. :)

Parkrunning… but on a bike. 🙂 These guys are fast! (thanks Gaby Bates for the photo!)

Right, now the laptop finished its clean install – I now have to get all the data and things reinstalled onto it. This is going to be a long day… on a final note, let’s see whether I can keep up with the updates in here in a more frequent fashion!